Getting Solaris 8 to light up a Qlogic QLA2310 Fibre Channel card using the SUNWqlc and SUNWqlcx drivers can be frustrating enough, but the headaches are only beginning if you want to connect it to a SAN and you don’t have all the right packages installed.
Last week, I installed the QLA2310 in a Sun Fire [...]
I managed to corrupt my NetInfo database on an OS 10.4 server a few weeks ago by not cleanly unmounting the drive after booting from DVD and resetting the admin password. Long story short, this left me with no users on the system at all. With no users, I could not log in to create [...]
Unlike other flavors of UNIX, RHEL does not have a command like adduser which walks you through the process step-by-step, so you have to remember the four flags useradd requires, and in what order it expects to receive them. Since I don’t manually add users unless I’m installing a new server, I don’t run the [...]
Asterisk is a complete open source software-based IP PBX solution that runs on a variety of platforms. It supports VOIP in several protocols, and can seamlessly integrate with almost any standards-based telephony equipment using relatively inexpensive hardware.
This guide is a quick-start set of notes that should help you get the Asterisk service up and running [...]
STATUS: Sold
We have another used Sun Fire T2000 server. Since the first one was sold in less than 24 hours, I thought it would be nice to offer this one up to this site’s readers as well. It has never been used in production and is in like-new condition.
Sun Fire T2000 Server
8 core 1.0 Ghz [...]
STATUS: Sold
The University where I work is currently selling a used Sun Fire T2000 server. Since many of this site’s readers are fellow Solaris administrators, I thought it would be nice to offer it up to them. It has never been used in production and is in like-new condition.
Sun Fire T2000 Server
4 core 1.0 Ghz [...]
Mounting filesystems in RHEL is pretty straightforward and easy. Occasionally, however, you will not want the filesystem to remain mounted all the time, but rather to automatically mount for a set period of time only when it is needed. Because of networking overhead, and the general unreliability of networks, NFS mounts are a good [...]
When you install RHEL, the filesystems are labeled for you. Usually you won’t have to mess with it anymore, but on occasion, you may want to change them to more accurately represent the data that is stored on that partition. If, for instance, you used to have all of your database files on a partition [...]
If you manage a UNIX system with a large number of directories that vary in size, chances are that you’ve needed to figure out which ones are using up the most disk space. Of course if the directories are user accounts, the best way to do this is to enable quotas and use the “repquota” [...]
Kids… DO NOT TRY THIS AT HOME! If this is not done exactly right, you will render your system unbootable and corrupt your data. That being said, under some circumstances you can take some space from your swap partition and add it to an unused one without initializing your entire disk. This is particularly useful [...]
Every time I have to spec a solution using Solaris, I always have to answer a bunch of questions in meetings about why Sun is so costly compared to Dell servers. Usually the reason for the higher price is not the servers (especially with X86 sun), but rather the storage. Since Sun does not offer [...]
